Cable Wire 4 Pin Ftdi Chip With A B Vcc Gnd

Description

This USB 2.0 Serial-TTL converter by Delock is due to its wide temperature range most suitable for industrial applications. It can be used for e.g. level converter, GPS-modules, interface controller, micro controller etc.

Specification

• Connector: USB 2.0 Serial-TTL male > 3.5 mm stereo jack (1. GND, 2. RXD, 3. TXD)
• Chipset: FTDI 232RL
• Cable gauge: 26 AWG
• Temperature range: -20°C to +80°C
• No-load current: 70 uA
• Converter: 5 V / 15 mA (VCC, GND)
• Compatible to UHCI / OHCI / EHCI controller
• LVTTL 3.3 V (data) / 4 mA or HighLevel 12 mA
• Data rate 300 baud – 3 Megabaud
• Databit: 7 or 8
• Stoppbits: 1 or 2
• Parity: none, space character, straight, unequal, mark
• Flow control: software XON/XOFF or hardware RTS/CTS
• FIFO: 128 Byte – RX
256 Byte – TX
• Cable length: ca. 1.80 m

USB Serial Console Cable
-USB – RJ12 Console cable, connects from a USB port on your laptop directly to a router console port. No adapters needed. It is for router console port for 1000, 1600, 2500, 2600, and 3600 series routers pinout

-This USB to RJ12 cable replaces RS232 (DB-9) serial cable perfectly, which makes connection from laptop/PC’s USB port directly to a console port possible and without any concern. No more RS232 Female and male adapters
-A must have accessory of routers/switches/firewalls with CONSOLE port. An unique cable works flawlessly on laptop and desktop computer
-Microsoft (HCL) certified to be compatible with Windows, no CD needed because the drivers are part of the OS distribution. If the drivers can’t be automatically installed, please ask us to provide installation guidance
-Full support for 32-bit and 64-bit Windows, MAC, Linux and Android. See Product Description for supported operating systems list